Linux Forums - Linux Help,Advice & support community:LinuxSolved.com

Network Troublshooting => Linux Servers Support => Topic started by: gauravbajaj on September 27, 2005, 05:41:22 AM

Title: Bandwidth Management in SUSE or REDHAT
Post by: gauravbajaj on September 27, 2005, 05:41:22 AM

Hi Grp....
I want to control bandwidth in Linux......, through squid.., means I want a bandwidth controller in  Linux................, .In  squid.conf file bandwidth management is quite difficult...

If Someone actuallly did Bandwidth control among clients through squid.conf file... then plzz let me know.., as I have read the tutorials abt (something called BUCKET) in squid .conf file that is used to control bandwidth , but i can't get it....................

Is there is any  other way to do this,If yes  then plzz Help me...

Thx
Gaurav

Title: Bandwidth Management in SUSE or REDHAT
Post by: Ricky on September 28, 2005, 06:41:12 PM

Well. delay pools are ur solution, its very easy if you can get its essense right. I had done that using squid but that was long ago and I really forgot everything. Yes the tutorials available are really not practical. I had to research many days/ many docs to get the right essense but still I was not able to grasp it fully and resulted in loss of all after few time.

I am definately looking to work on it but I have other priorities too .:( It seems that delay pool tutorial is very much needed.

Title: Bandwidth Management in SUSE or REDHAT
Post by: gauravbajaj on September 29, 2005, 04:35:06 AM

Ricky
I did it..No problem....
Thx
Gaurav

Title: Re: Bandwidth Management in SUSE or REDHAT
Post by: fdawy on September 29, 2005, 06:10:27 PM

Quote from: "gauravbajaj"

Hi Grp....
I want to control bandwidth in Linux......, through squid.., means I want a bandwidth controller in  Linux................, .In  squid.conf file bandwidth management is quite difficult...

If Someone actuallly did Bandwidth control among clients through squid.conf file... then plzz let me know.., as I have read the tutorials abt (something called BUCKET) in squid .conf file that is used to control bandwidth , but i can't get it....................

Is there is any  other way to do this,If yes  then plzz Help me...

Thx
Gaurav

hi
I need to give the specific lesson from data the means reaches about 15 kilo and how can be preformed throughout the programme frontpage easily .
 :o

Title: Bandwidth Management in SUSE or REDHAT
Post by: ashishraj on March 21, 2006, 04:59:37 AM

Quote

Ricky
I did it..No problem....
Thx
Gaurav

gaurav
how u did
i want to learn too.
 help me about delay pools.
any link or doc. plz....help me.

Title: Bandwidth Management in SUSE or REDHAT
Post by: gauravbajaj on March 21, 2006, 10:59:40 AM

Hi

I have configured it long time ago. but at that time i used webmin tool..
Its quite easy through webmin tool.

As all things are Graphical..Ya if u do it from squid.conf file..., then my suggestion is firstly to do it using webmin tool , after that just see the new entries it made i.e check the new entries which is made by webmin tool in squid.conf file....

After that do it from Comand mode :D

If u will find any difficulty...then tell me

Cheers
Gaurav Bajaj

Title: Bandwidth Management in SUSE or REDHAT
Post by: ashishraj on March 21, 2006, 01:38:22 PM

Thank you! gaurav
let me try webmin :)

Title: Bandwidth Management in SUSE or REDHAT
Post by: ashishraj on March 22, 2006, 04:13:20 AM

gaurav
i try webmin
i cant open any sites on my server and clients. all settings are gone :) (i make transparent proxy)
i m using fedora core2
tell me how to use webmin step by step
i have 2 ethernet cards on server.
eth0 have real ip
eth1 have my network
and want to make cache server, site filtering and bandwidth control on each clients
plz...reply fast i m confused