Author Topic: MRTG and SNMP (Read 7716 times)

shani · « **on:** February 07, 2006, 12:01:51 PM »

Hi All

i want to setup MRTG on my Fedora core 4 machine
i have two networks one eth0 for lan
and one eth1 for external link
kinldly give me easy how to as i have already searched for
it but i did't find anything special which guide me properly.

thanks in advance for your help!!!!!!!!

thanks
Shan

Ricky · « **Reply #1 on:** February 10, 2006, 12:02:08 PM »

Well.. there is automated script to install mrtg ..

Do following while you are connected to internet :

Code: [Select]

wge*t http://www.web4host.net/tools/install.mrtg.sh
    chmod +x install.mrtg.sh
    ./install.mrtg.sh

then run following command

Code: [Select]


env LANG=C /usr/local/mrtg-2/bin/mrtg/var/www/html/mrtg/core/mrtg.cfg

after that.. to access mrtg just type

http://serverip/mrtg

shani · « **Reply #2 on:** March 02, 2006, 12:02:23 PM »

Hi Ricky,

this link is not working.

wge t http://www.web4host.net/tools/install.mrtg.sh

thanks
shani

Ricky · « **Reply #3 on:** March 02, 2006, 08:51:19 PM »

Well. . for security reason wge*t can't be used here , its actually you to remove the asteriek and the use it.

All files and links are are working . I have checked.

shani · « **Reply #4 on:** March 03, 2006, 07:53:51 AM »

thanks ricky its working.

SHani

shani · « **Reply #5 on:** March 03, 2006, 07:58:32 AM »

one question more

is there any space in the followiing command

env LANG=C /usr/local/mrtg-2/bin/mrtg/var/www/html/mrtg/core/mrtg.cfg

As when i gave this command it said that there is no such directory found.

regards
SHANI

shipoin_97 · « **Reply #6 on:** April 12, 2006, 07:48:45 AM »

Dear Ricky ,

Use the following command ,
Do following while you are connected to internet :
Code:
wge*t http://www.web4host.net/tools/install.mrtg.sh
chmod +x install.mrtg.sh
./install.mrtg.sh

then run following command
Code:

env LANG=C /usr/local/mrtg-2/bin/mrtg/var/www/html/mrtg/core/mrtg.cfg

after that.. to access mrtg just type

http://serverip/mrtg

I run my mrtg perfectly . But i have two question :

1) Is this MRTG is for my Machine's IP ?

2) suppose i have a cisco swich . A client network is connected via this switch port where it's IP is suppose 192.168.10.2 . In another port (port 3) my linux server
is connected where my IP is 192.168.10.3 . In this moment i want to see the Network Traffic or Bandwidth of my client's Network(192.168.10.2) . For this reason is any change is need to make in the above configuration ?

plz help ...........

Ricky · « **Reply #7 on:** April 12, 2006, 06:23:05 PM »

yes this is your machines traffic graph.

well to see traffic for that particular machine you have to install mrtg on it also.