ok ricky
here is the reply of cat/proc/pci
but rhl9 freezes when i use xmms or give sndconfig command
help
bye sumit
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 82810 GMCH [Graphics Memory Controller Hub] (rev 3).
Bus 0, device 1, function 0:
VGA compatible controller: Intel Corp. 82810 CGC [Chipset Graphics Controller] (rev 3).
IRQ 5.
Prefetchable 32 bit memory at 0xd0000000 [0xd3ffffff].
Non-prefetchable 32 bit memory at 0xd6000000 [0xd607ffff].
Bus 0, device 30, function 0:
PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 2).
Master Capable. No bursts. Min Gnt=6.
Bus 0, device 31, function 0:
ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 2).
Bus 0, device 31, function 1:
IDE interface: Intel Corp. 82801AA IDE (rev 2).
I/O at 0xf000 [0xf00f].
Bus 0, device 31, function 2:
USB Controller: Intel Corp. 82801AA USB (rev 2).
IRQ 3.
I/O at 0xd000 [0xd01f].
Bus 1, device 4, function 0:
Modem: PCTel Inc HSP MicroModem 56 (rev 2).
IRQ 5.
I/O at 0xc000 [0xc03f].
Bus 1, device 10, function 0:
Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 16).
IRQ 3.
Master Capable. Latency=32. Min Gnt=2.Max Lat=24.
I/O at 0xc800 [0xc8ff].