Author Topic: NAT in Fedora Core 4 (Read 6099 times)

shani · « **on:** January 04, 2006, 06:37:44 AM »

HI I am using Fedora Core 4 and i have followed the script mentioned in the tutorial i.e

[[[[[[[[[[[
# Defines the location of iptables executables.
iptables=/sbin/iptables

#Clears if any old iptable rules/ policies are there.
iptables --flush -t nat

# Now we will do Masquerading ie. we are doing NAT.
iptables --table nat --append POSTROUTING --out-interface ppp0 -j MASQUERADE
iptables --append FORWARD --in-interface eth0 -j ACCEPT

# Enabling packet forwarding.
echo 1 > /proc/sys/net/ipv4/ip_forward ]]]]]]]]]]]]]]

where eht1 is external interfae and eth0 is internal interface, but it is not working while i have done this on my RED hat llinux 8

what should i do in this please guide me

thanks in adavance.

regard
Akmal

shani · « **Reply #1 on:** January 05, 2006, 08:23:42 AM »

could any reply me or not?

shani

ronaldjayr_jover · « **Reply #2 on:** January 05, 2006, 08:31:29 AM »

good day,

what NAT do you want to do sir?

shani · « **Reply #3 on:** January 05, 2006, 11:45:02 AM »

i want to use NAT to make this machine as router for my private network.
so that all the private trafic will use this machine as gateway for internet.

thanks

Ricky · « **Reply #4 on:** January 05, 2006, 05:19:58 PM »

try to run those command on shell.. and see hw many of them executed successfully.. and then give the result..
meanwhile u can also try firestarter to do NAT.. it will be easier for u.