Author Topic: Bandwidth Management in SUSE or REDHAT (Read 7366 times)

gauravbajaj · « **on:** September 27, 2005, 05:41:22 AM »

Hi Grp....
I want to control bandwidth in Linux......, through squid.., means I want a bandwidth controller in Linux................, .In squid.conf file bandwidth management is quite difficult...

If Someone actuallly did Bandwidth control among clients through squid.conf file... then plzz let me know.., as I have read the tutorials abt (something called BUCKET) in squid .conf file that is used to control bandwidth , but i can't get it....................

Is there is any other way to do this,If yes then plzz Help me...

Thx
Gaurav

Ricky · « **Reply #1 on:** September 28, 2005, 06:41:12 PM »

Well. delay pools are ur solution, its very easy if you can get its essense right. I had done that using squid but that was long ago and I really forgot everything. Yes the tutorials available are really not practical. I had to research many days/ many docs to get the right essense but still I was not able to grasp it fully and resulted in loss of all after few time.

I am definately looking to work on it but I have other priorities too .

It seems that delay pool tutorial is very much needed.

gauravbajaj · « **Reply #2 on:** September 29, 2005, 04:35:06 AM »

Ricky
I did it..No problem....
Thx
Gaurav

fdawy · « **Reply #3 on:** September 29, 2005, 06:10:27 PM »

Quote from: "gauravbajaj"

Hi Grp....
I want to control bandwidth in Linux......, through squid.., means I want a bandwidth controller in Linux................, .In squid.conf file bandwidth management is quite difficult...

If Someone actuallly did Bandwidth control among clients through squid.conf file... then plzz let me know.., as I have read the tutorials abt (something called BUCKET) in squid .conf file that is used to control bandwidth , but i can't get it....................

Is there is any other way to do this,If yes then plzz Help me...

Thx
Gaurav

hi
I need to give the specific lesson from data the means reaches about 15 kilo and how can be preformed throughout the programme frontpage easily .

ashishraj · « **Reply #4 on:** March 21, 2006, 04:59:37 AM »

Quote

Ricky
I did it..No problem....
Thx
Gaurav

gaurav
how u did
i want to learn too.
help me about delay pools.
any link or doc. plz....help me.

gauravbajaj · « **Reply #5 on:** March 21, 2006, 10:59:40 AM »

Hi

I have configured it long time ago. but at that time i used webmin tool..
Its quite easy through webmin tool.

As all things are Graphical..Ya if u do it from squid.conf file..., then my suggestion is firstly to do it using webmin tool , after that just see the new entries it made i.e check the new entries which is made by webmin tool in squid.conf file....

After that do it from Comand mode

If u will find any difficulty...then tell me

Cheers
Gaurav Bajaj

ashishraj · « **Reply #6 on:** March 21, 2006, 01:38:22 PM »

Thank you! gaurav
let me try webmin

ashishraj · « **Reply #7 on:** March 22, 2006, 04:13:20 AM »

gaurav
i try webmin
i cant open any sites on my server and clients. all settings are gone

(i make transparent proxy)
i m using fedora core2
tell me how to use webmin step by step
i have 2 ethernet cards on server.
eth0 have real ip
eth1 have my network
and want to make cache server, site filtering and bandwidth control on each clients
plz...reply fast i m confused