Help me to connect to internet using LG LSP 340E

[christopher_1]

Hi,

I am using a TataIndicom LG LDP 340 E phone, I want to connect to the net in Linux, but I am unsuccessful, I use red hat Linux version 2.4.20-6, I tried some of the methods given in the web. The following are the results I got from those steps:
Method1:
I ran the following commands from root.
# !/bin/bash
echo "user internet password internet" > $HOME/.ppprc
pppd /dev/ttyS0 115200 debug usepeerdns defaultroute noauth connect '/usr/sbin/chat -v "" at+crm=1 OK "atdt#777" CONNECT' mtu 264

It gets connected, I can infer that from my phone display because the timer starts and I get T 9.6 R 9.6, but when I try to browse I get the following message” www.yahoo.com could not be found. Please check the name and try again.”

I can get disconnected with this script.

# !/bin/bash
killall -9 pppd


Method 2:
I created a file with the name wvdial.conf in etc directory. The following are the contents of the file:
[Modem0]
Modem=/dev/ttyS0
Baud=115200
SetVolume=0
Dial Command = ATDT
init1=ATZ
init2=AT+CRM=1
FlowControl= Hardware (CRTSCTS)
[Dialer reliance]
Username= internet
Password= internet
Phone=#777
Stupid Mode= 1
Inherits = Modem0

After creating this file I ran wvdial from the root and this is what I got.

[root@localhost root]# wvdial tata
--> WvDial: Internet dialer version 1.53
--> Warning: section [Dialer tata] does not exist in wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory

Please help me to fix this problem, I am able to connect to the net in all windows versions like 98,2000,XP etc .

Regards,
Christopher.

[gauravbajaj]

Hi
This is not a big issue, I have connected with this ph previously many times..
I know what u r missing...

Okk after Connected to internet .. Check ur ip-address..., If it gets ip-address automatically it means that u r connected...

& plzz make entry in /etc/resolv.conf file of ur DNS servers manually.......
as In this Connection there is a problem that it cant make entry in /etc/resolv.cnf file...

& if u dont know ur DNS addresses then go to windows & check the DNS addresses there, as when u conncted to windowz using this phone.. it takes DNS addresses automatically but in Linux it cant....
So after  saw ur DNS addresses entries in Windowz make it in Linux  
in /etc/resolv.conf file(THIS IS THE STEP U MISSED I THINK)

After that ur Internet  will work....

Enjoy

Gaurav










(

[christopher_1]

Hi,
Thanks for your timely help, yes the problem was with DNS server,i got the settings from windows and now it is working fine.
Regards,
Christopher.

[ZeCougar]

hi,

I am having a problem with the Tata walky phone conecting to the net.

I'm using the second approach (WvDial). Most of the time it does not dial. but even when it does dial i get the following error

"pppd returned with an exit code of 10".

I checked the man pages for this exit code and it means that "pppd was unable to find another server that acceptd IP protocol".


Weird ?

Any ideas what next ?

Please let me have my eyes (internet) back !!!

Cheers,
Abhinav

[christopher_1]

Dear Abhinav,

Please try the following procedure:
1. create a script file called upnet.sh (used for connecting)with the following contents

# ! /bin/bash
echo "user internet password internet" > $HOME/.ppprc
pppd /dev/ttyS0 115200 debug usepeerdns defaultroute noauth connect '/usr/sbin/chat -v "" at+crm=1 OK "atdt#777" CONNECT' mtu 264

2. create another script file called downnet.sh(used for disconnecting) with the following contents

# !/bin/bash
killall -9 pppd
3. now you have to specify the dns server name in the file called resolv.conf which you have to create in the /etc directory.

if you dont know the dns server name you can follow this:
if you have windows OS, connect to the net , open a commond prompt and type ipconfig /all it gives ur primary DNS and secondary DNS note it down.

In the linux platform open the resolv.conf file and type
nameserver=the  primary DNS no u got in windows
nameserver=the  secondary DNS no u got in windows

NOW U CAN RUN upnet.sh TO CONNECT TO THE NET.

Regards,
Christopher.

[rahul_patel]

Hi,

I am using a TataIndicom LG LDP 340 E phone, I want to connect to the net in Linux, but I am unsuccessful, I use fedora core 4, I tried some of the methods given in the web. The following are the results I got from those steps:
Method1:
I ran the following commands from root.
# !/bin/bash
echo "user internet password internet" > $HOME/.ppprc
pppd /dev/ttyS0 115200 debug usepeerdns defaultroute noauth connect '/usr/sbin/chat -v "" at+crm=1 OK "atdt#777" CONNECT' mtu 264

It gets connected, I can infer that from my phone display because the timer starts and I get T 9.6 R 9.6, but when I try to browse I get the following message” www.yahoo.com could not be found. Please check the name and try again.”

I can get disconnected with this script.

# !/bin/bash
killall -9 pppd


Method 2:
I created a file with the name wvdial.conf in etc directory. The following are the contents of the file:
[Modem0]
Modem=/dev/ttyS0
Baud=115200
SetVolume=0
Dial Command = ATDT
init1=ATZ
init2=AT+CRM=1
FlowControl= Hardware (CRTSCTS)
[Dialer reliance]
Username= internet
Password= internet
Phone=#777
Stupid Mode= 1
Inherits = Modem0

After creating this file I ran wvdial from the root and this is what I got.

[root@localhost root]# wvdial tata
--> WvDial: Internet dialer version 1.53
--> Warning: section [Dialer tata] does not exist in wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory

Please help me to fix this problem, I am able to connect to the net in all windows versions like 98,2000,XP etc .

Regards,
Christopher.

[gauravbajaj]

Hi rahul
I have already given solution in my above post...

OK i will tell u again:

 After Connected to internet .. Check ur ip-address..., If it gets ip-address automatically it means that u r connected...
 
 & plzz make entry in /etc/resolv.conf file of ur DNS servers manually.......
 as In this Connection there is a problem that it cant make entry in /etc/resolv.conf file...
 
 & if u dont know ur DNS addresses then go to windows & check the DNS addresses there, as when u conncted to windowz using this phone.. it takes DNS addresses automatically but in Linux it cant....
 So after saw ur DNS addresses entries in Windowz make it in Linux
 in /etc/resolv.conf file(THIS IS THE STEP U MISSED I THINK)
 
 After that ur Internet will work....
 
 Enjoy
 
 Gaurav

[13lackhat]

If your Tata Wlaky LG LST 350E (if I remember the model correctly) is connected to a USB port then the device is /dev/ttyACMx where x is a number (zero onwards) to which the phone is connected. (Try all if you are not sure!) I personally use the rconnect-0.5 script to connect my phone on Fedora Core 4. I you want to use that search for it over the internet and download it.

PS:Don't forget to edit the file /etc/resolv.conf as described in the above posts.

[sherifmayika]

my modem is trying to connect but fails plese help.


[root@localhost ~]# wvdial TATA
--> WvDial: Internet dialer version 1.54.0
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
ATQ0
OK
--> Re-Sending: ATZ
ATZ
OK
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
ATQ0
OK
--> Re-Sending: ATZ
ATZ
OK
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
ATQ0
OK
--> Re-Sending: ATZ
ATZ
OK
[root@localhost ~]#

[Ricky]

Have you set up right baud rate in the phone ?

BTW, see this if that doesn't works..

---> internet on my linux FC5 reliance lg350 USB

[sherifmayika]

two things I have set in phone are cable type and modem speed

[Ricky]

You try using rconnect script , may be that can help you straight !

[sherifmayika]

in my win2k it is working

[sherifmayika]

I have rconnect-cmdline-1.0. but I dont understand how to install it even after reading the readme

any help

[Ricky]

You have to all from commands.
Read it again and carefully, you will get the idea.