Author Topic: How to use hyperterminal feature in linux (Read 7757 times)

sekhar_vrc · « **on:** August 13, 2004, 02:54:03 AM »

Hello

To configure network devices in like switches,routers,ras's and other network devices in command mode " vt100 setup " is requiired.
This can be done using Hyper terminal in windows .

How can i do the same thing in Redhat 9.0 or workstation 3.0?

Please guide me.

sekhar

Ricky · « **Reply #1 on:** August 13, 2004, 07:21:48 AM »

Open SSH .. I think this is what you need !! give little searching abt it !

lanlocked · « **Reply #2 on:** August 13, 2004, 01:52:08 PM »

the program you need is called ' minicom' -- you can type "man minicom" for usage instructions

dragoncity99 · « **Reply #3 on:** August 14, 2004, 02:17:18 PM »

There are two ways actually for me. One is to use the software interface which is packaged with ur routers (or even print servers).
U accessed it mainly by web browsers.

Another way is to use telnet. To connect to a router for example with an ip : 192.168.1.1

Just type at command prompt

----> telnet 192.168.1.1
Then press enter.

For the web browser just type the ip address and go for it.